Return
Print
Email
![PFERD COMBIDISC® CONTOUR Abrasive Disc, 2-3/8" Dia, Type CDR, 80 Grit, Aluminum oxide](/vendors/6924/large/cdr-60-a-80-contour-kombi-rgb.png "PFERD COMBIDISC® CONTOUR Abrasive Disc, 2-3/8" Dia, Type CDR, 80 Grit, Aluminum oxide")
PFERD COMBIDISC® CONTOUR Abrasive Disc, 2-3/8" Dia, Type CDR, 80 Grit, Aluminum oxide
Call For Price
- Part Number: 42759006
- UPC: 04007220898857
- Availability:
Quantity:
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
Info & Guides
Very flexible and adaptable due to scalloped-edge outer contour shape. Helps prevent cutting into the workpiece. The CDR clamping system has a threaded connection with male thread (plastic). Also compatible with the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.
Specifications
Details
Industrial Category:
Abrasives
Industrial Subcategory:
Abrasive Wheels, Discs and Brushes
Industrial Subtype:
Sanding Discs and Kits
Category Level 4:
Quick Change Discs
Abrasive:
Aluminium oxide A-CONTOUR
Applications:
Deburring
Applications 1:
Step-by-step fine grinding
Applications 2:
Leveling
Applications 3:
Roughening
Applications 4:
Sharpening
Applications 5:
Surface work
Applications 6:
Work on weld seams
Applications 7:
Working on edges
Clamping System:
CDR system
Country of Origin:
DE
Diameter External (In):
2 3/8
Drive Types:
Angle grinder
Drive Types 1:
Cordless angle grinder
Drive Types 2:
Flexible shaft drive
Drive Types 3:
Straight grinder
EAN:
4007220898857
EDP:
42426
Grit Size:
80 CONTOUR
Item Quantity:
50
Item Weight (kgs):
0.006
MANUFACTURER_TYPE_DESCR:
CDR 60 A 80 CONTOUR
Materials that can be worked:
Annealed cast iron
Materials that can be worked 1:
Brass
Materials that can be worked 10:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 11:
Thermoplastics
Materials that can be worked 12:
Titanium
Materials that can be worked 13:
Titanium alloys
Materials that can be worked 2:
Bronze
Materials that can be worked 3:
Cast steel
Materials that can be worked 4:
Copper
Materials that can be worked 5:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 6:
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Materials that can be worked 7:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 8:
Stainless steel (INOX)
Materials that can be worked 9:
Steel materials with a hardness > 54 HRC
Order Quanityt:
60
Pferdefficiency:
PFERDEFFICIENCY recommends COMBIDISC® products to reduce disc change and setup times.
Pferdergonomics:
PFERDERGONOMICS recommends COMBIDISC® as an innovative solution to reduce vibration, noise and dust produced during use and to improve comfort when working.
Prop 65:
View
Recommendations for use:
Use COMBIDISC® grinding discs with arbors or abrasive disc holders on flexible shaft drives with angle handpieces, compressed-air or electric angle grinders.
Recommendations for use 1:
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
Recommendations for use 2:
Use a 1" - 2" diameter abrasive disc holder.
Rpm, Optimum, From:
7500
Rpm, Optimum, To (Rpm):
11000
Safety notes:
The maximum permitted peripheral speed is 9,800 SFPM.
Safety notes 1:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
UNSPNC:
31191506
UPC Code:
97758424264
Other Details
Convenient to use due to simple handling and low-vibration working.
No operational disruptions caused by sticking, slipping, or disengaging.
Reduced down time due to quick changes.
Copyright © 2018 CCS Industrials. All Rights Reserved. Powered by 
Shipping charges TBD…You will be contacted to confirm your order and credit card information.
Thank you for your business.
Contact CCS for volume discounts on your order.
Freight charges from Canada will apply
Thank you for your business.
Contact CCS for volume discounts on your order.
Freight charges from Canada will apply